The Smart Volume tool triangulates a grid below the surface of a polygon feature drawn on your site. It uses this grid to estimate the base level of the feature, and automatically calculates a volume above this base level.

Smart Volumes are useful for estimating volumes on a flat or largely even base level such as:

  • Measuring stockpiled material in stockyards or ROM pads.
  • Measuring the volume of excavations, pits, and trenches.
  • Measuring the volume of material stockpiled on sloped ground.

How to use Smart Volume: 

  • Draw a polygon around the area of interest, and open the volume measurement tool in the annotation panel. 
  • Select Smart Volume from the dropdown list in the volume measurement tool. 
  • The Net Volume represents the amount of material required to reach the Smart Volume's interpolated base level.  

The difference between Smart Volume and Reference Level Volume

  • Smart Volumes allow for the measurement of stockpiles on ground that has a slope. (e.g., gravel dumped on a ramp or other sloping surface).
  • A Smart Volume takes into account the sloped surface by using polygon triangulation to interpolate the base of the stockpile from the elevation of the surrounding terrain.
  • A Reference Level Volume uses a horizontal plane projected from a a Reference Level. Measuring material stockpiled on a slope using this tool would include a slice of the terrain beneath the stockpile as can be seen in the diagram below.  

Learn more about the 3 types of volume measurement. 

Did this answer your question?