How to Use Reference Level Volume


A Reference Level Volume allows you to measure a volume from a predefined horizontal plane at a specific known height above your site's datum. This is useful for measuring sections from a known base or toe, such as cut volumes from the base of an excavation, benches, pit walls, and ramps in mines, quarries, or landfills. 

How to use Reference Level Volume: 

1. From the MEASURE tab, click CREATE A MEASUREMENT.




 2. Choose a template from the Calculate Volume section.

3. Use the Magic Polygon tool or draw a polygon around the area of interest. From the Choose a measurement type dropdown menu, select Reference Level Volume.


4. Enter a height (the Reference Level) relative to your site's vertical datum into the textbox. 

Changing the reference level used for the measurement makes it possible to model a situation where material needs to be added or removed to a specific depth. 

The difference between Smart Volume and Reference Level Volume

  • Smart Volumes allow for the measurement of stockpiles on ground that has a slope. (e.g., gravel dumped on a ramp or other sloping surface).
  • A Smart Volume considers the sloped surface by using polygon triangulation to interpolate the stockpile base from the elevation of the surrounding terrain.
  • A Reference Level Volume uses a horizontal plane projected from a Reference Level. Measuring material stockpiled on a slope using this tool would include a slice of the terrain beneath the stockpile, as seen in the diagram below.  

Learn more about the different types of volume measurement.


I still can't do it!

We wrote these articles to equip you with everything you need to get the job done on your own, but we understand that sometimes this isn't sufficient.

If you're stuck, you can connect with our support team by clicking the support button on the top right corner of your user portal.

Related to