Battery Hot Swaps for the Matrice 300 RTK

The Matrice 300 RTK uses the TB60 Intelligent Flight Battery with a dual-battery configuration. This configuration with the two TB60 batteries makes the Matrice 300 RTK a hot-swappable drone. 

When batteries are low, the pilot can land the aircraft and swap the batteries out with fully charged batteries while the aircraft is still on. 

At least one battery must remain powered on and installed in the aircraft to perform a hot-swap.

Check out the video below to see a demonstration of the battery hot-swap function.



I still can't do it!

We wrote these articles to equip you with everything you need to get the job done on your own, but we understand that sometimes this isn't sufficient.

If you're stuck, the Propeller hardware support team may be able to help. You can contact them by emailing