How to Check the Firmware Version Using DJI Pilot 2


DJI Pilot 2 is the flight software used by the DJI Matrice 300 RTK, DJI Matrice 350 RTK, and the DJI Mavic 3 Enterprise.

Knowing which firmware version is running helps assist with upgrades and troubleshooting. Here is how to find which firmware version you have installed:

1. Power on your RC and enter the DJI Pilot 2 app.

2. Then tap on the Status button in the top-right corner.

3. Tap Firmware on the left side of the screen.

4. The Firmware Update screen will prompt you if any new updates are available. Make sure to update the firmware, if prompted.

 

 

 


I still can't do it!

We wrote these articles to equip you with everything you need to get the job done on your own, but we understand that sometimes this isn't sufficient.

If you're stuck, the Propeller hardware support team may be able to help. You can contact them by emailing hardwaresupport@propelleraero.com.au.