How to Update the Firmware on the Mavic 3 Enterprise

DJI releases periodic firmware updates for the Mavic 3 Enterprise remote controller and aircraft. For the best performance, we recommend keeping your Mavic 3 Enterprise up to date with the latest firmware available. 

Before you start

• Fully charge your controller and aircraft batteries before starting the update procedure.
• Verify that you have a stable internet connection. A slow or poor connection will cause the update to fail or take a long time to complete successfully.
• Remove the propellers from the aircraft and verify that the camera is free from obstacles around it, including the plastic gimbal restraints.

Please note that the Fly Safe database (Precise Fly Safe database) needs to be updated periodically.

How to update your remote controller

1. With a fully-charged battery, power on your Mavic 3 Enterprise controller and make sure it is connected to WiFi.

2. From the home screen, tap the All modules need to be updated text in the bottom-right corner of the screen.

3. Tap the Update All button.

4. Once the installation is complete, restart the remote controller and confirm the aircraft and remote controller have been updated to the latest firmware version.

I still can't do it!

We wrote these articles to equip you with everything you need to get the job done on your own, but we understand that sometimes this isn't sufficient.

If you're stuck, the Propeller hardware support team may be able to help. You can contact them by emailing hardwaresupport@propelleraero.com.au.