Getting Started
The DirtMate Management Application is specifically built for DirtMate users to manage and install their DirtMate hardware and site settings.
This application is available on Mobile—Android, iOS, and PC.
What’s new?
The new DirtMate Management app empowers users to take full control of their Position Monitoring hardware.
The key features enabled with the app are:
- Setup & decommission your Position Monitoring sites.
- Manage & decommission the Base DirtMate on a site.
- Set the data collection times of each DirtMate to maximize battery life and capture the time required.
Mobile Example |
|
PC Example |
|
Adding a base Dirtmate to an existing monitoring site
A base DirtMate is installed in a fixed location, acting as a reference for the roving DirtMates. If the existing base DirtMate on the site needs to be moved and/or replaced, its position information must be updated in the management app.
Adding a new position monitor to an existing monitoring site
A position Monitor is added via the DirtMates tab.
Then, select the unit's serial number to be added as a position monitor.
Select the Edit icon and scroll down to Install configuration.
From the Site dropdown, tap Choose and select the site where the position monitor will be used.
Enter the install configuration in the appropriate fields.
Deactivating a position monitor on an existing monitoring site
To deactivate a position monitor on a site, select the edit icon to enter the install configuration screen.
Scroll down and tap UNINSTALL NOW. Once you have successfully uninstalled it, a confirmation popup will appear at the bottom of the screen.
I still can't do it!
We wrote these articles to equip you with everything you need to get the job done on your own, but we understand that sometimes this isn't sufficient.
If you're stuck, the Propeller Site Support team may be able to help. You can contact our support team by emailing sitesupport@propelleraero.com.au.
Related to